McIntyre Dolphin
McIntyre Dolphin
Technische Data
| Mould Type: | Cubes or ingots |
| Number of Moulds: | 56 Moulds |
| Number of Impressions: | Variable |
| Mould Material: | Ductile Cast Iron |
| Production Rate: | Up to 3 Tones per hour |
| Mould Pre-heat: | Natural gas burners (Gas regulator required) Total heat output = 50kw |
| Required gas pressure: | 10 – 20bar |
| Mould Cooling: | 24 Water Spray nozzles |
| Ingot Knockout: | Automatic hammer |
| Maximum Water consumption: | 120 Liters / min. at 3 bar |
| Pouring System: | Pouring Wheel |
| Drive Motor: | 1.1W 380-415V 50Hz 3 phase motor- gearbox variator |
| Speed control: | Electronic Inverter |
| Conveyor chain: | 160mm pitch bolt assembly |
| Machine construction: | Robust Steel frame – fully welded construction |
| Safety features: | Emergency stop switch |
| Additional Extras: | Oil pots for chain lubrication, Pre-Heat burners, flame failure detection & electronic ignition |
| Dimensions: | TBC |
| Approx. Weight: | Up to 6,500kg with Moulds |
Een offerte aanvragen?
Neem dan contact met ons op voor een vrijblijvende offerte!
